How Much Does Epoxy Flooring Cost in McKinney, TX
Ask three contractors what an epoxy floor costs and you will get three numbers that barely seem to describe the same job. One says $1,800. One says $4,200. One will not give you a number at all until someone walks the slab. None of them are necessarily lying.
Epoxy flooring is priced on what is underneath the coating as much as the coating itself, and McKinney concrete has opinions about that. Shifting clay soil, hard summer sun, and slabs poured across four decades of development all move the number.
So what should a McKinney property owner actually expect to pay in 2026?
What Epoxy Flooring Costs Per Square Foot in McKinney TX
Most residential epoxy flooring in the McKinney and greater DFW market runs $4.50 to $9.00 per square foot installed. Commercial grade systems range from $6.00 to $15.00 per square foot depending on traffic demands and system complexity. For a standard two car garage of 400 to 500 square feet, that translates to roughly $2,000 to $4,500 for a professionally installed flake system.
Dallas area pricing has risen 12 to 18 percent in the past two years, pushed by demand for polyaspartic topcoats and a tighter market for skilled installers. If someone quotes you $1.50 per square foot, they are selling a hardware store paint kit, not a coating system.
Seven Factors That Raise or Lower Your Epoxy Flooring Price
Why do two garages on the same McKinney street get quotes $2,000 apart? Because the slab tells a different story each time.
Concrete condition. Cracks from shifting North Texas clay add roughly $300 to $700 in diamond grinding and crack injection.
Square footage. Larger floors cost more in total but less per square foot.
Coating system. Solid color sits at the low end, flake in the middle, metallic at the top.
Topcoat choice. Polyaspartic adds about $1.00 per square foot and cuts cure time dramatically.
Moisture mitigation. A high moisture slab needs a barrier primer at $1.50 to $3.50 per square foot.
Old coating removal. Failed paint or peeling epoxy has to come off before anything new goes down.
Sun exposure. West facing bays need UV stable topcoats to avoid yellowing.
Epoxy Flooring Cost by Project Type for Garages, Patios, and Commercial Floors
Which project are you actually pricing? The number moves more than most people expect.
Large commercial concrete coating jobs earn volume pricing and can drop toward $5.00 per square foot above 5,000 square feet. Patios and pool decks often price higher per foot than garages, since outdoor surfaces demand UV stable topcoats and slip resistant texture.
Note: These figures represent the current industry standards for the area. However, actual costs vary based on concrete condition, surface preparation, and specific site requirements. An accurate, finalized quote can only be provided following a professional consultation and on-site assessment.
How Epoxy Flooring Costs Compare to Polished Concrete and Custom Coatings
Is epoxy always the cheapest route? Not necessarily, and cheapest is rarely the useful question.
Polished concrete floor costs more upfront but refines the slab you already own, so there is no coating layer to peel or reapply later. Epoxy wins on chemical resistance and color flexibility. Decorative systems cost the most and buy you appearance. The better question is which floor you will still be happy with in twelve years.
Note: These figures represent the current industry standards for the area. However, actual costs vary based on concrete condition, surface preparation, and specific site requirements. An accurate, finalized quote can only be provided following a professional consultation and on-site assessment.
What a Quote From Aesthetic Concrete Coatings Includes
What should a real estimate look like before you sign anything? The vague ones tend to be the expensive ones.
Every quote we issue itemizes:
Mechanical diamond grinding and full surface preparation
Crack repair and joint treatment where the slab requires it
Moisture testing results and any barrier primer needed
The exact coating system, mil thickness, and specified topcoat
Color and flake selection confirmed in writing
Projected cure time and when you can drive on the floor again
A single number scrawled on a business card gives you nothing to compare against. Line items are how you tell a good $6.00 per square foot floor from a $6.00 per square foot floor that peels in eighteen months.
Get a Free Epoxy Flooring Estimate in McKinney TX From Aesthetic Concrete Coatings
Pricing an epoxy floor without seeing the slab is guesswork, and guesswork is how people end up disappointed twice. Aesthetic Concrete Coatings walks the space, tests moisture, assesses the concrete honestly, and gives you a written breakdown you can actually compare against other bids. No pressure, no vague ballpark, no surprise line items after the grinder starts.
We install epoxy flooring, polished concrete, and custom coatings across McKinney, Frisco, Dallas, Prosper, Melissa, Farmersville, Allen, The Colony, Little Elm, and communities throughout Collin County and the northern DFW metroplex.
Call (469) 994-4478 or request your free estimate online, and find out what your floor actually costs.
FREQUENTLY ASKED QUESTIONS
How much does epoxy flooring cost for a two car garage in McKinney?
A professionally installed flake system for a 400 to 500 square foot garage typically runs $2,000 to $4,500. Slab condition and topcoat selection account for most of the variation within that range.
Is epoxy flooring cheaper than replacing the concrete?
Yes, and by a wide margin. Full slab removal and repour runs $8 to $15 per square foot, while a coating system protects the existing concrete at a fraction of that cost.
How long does an epoxy floor last in North Texas conditions?
A properly prepared and professionally installed floor lasts 10 to 20 years. Coatings applied over unground or untested concrete often fail within three years, which is where most horror stories originate.
Why do concrete coating quotes vary so much between contractors?
Surface preparation is the single largest cost variable and the easiest thing to skip. Two quotes can look similar on paper while one includes diamond grinding and moisture testing and the other does not.
Can epoxy be installed on a patio or pool deck?
Yes, though outdoor surfaces require UV stable topcoats and slip resistant texture, which pushes the price above a comparable garage. Expect roughly $5.00 to $12.00 per square foot for exterior work.
